Tip to Spray Paint Your Car

The majority people avoid paint your car for themselves because they are afraid not to do it properly. Previous to you begin, park your car in a well ventilated area to facilitate drying. Use duct tape and plastic sheeting to cover the parts of the car that will not be painted as windows , lights and mirrors. Rub the surface of your vehicle with medium grit sandpaper . Wipe up with a dry cloth to remove any foreign particles.
On the surface of your car, applying a layer of primer. Use brush to ensure that the primer is spread uniformly . Using sandpaper fine grain , rub the surface of the car. Then you can remove dirt and sand particles with a dry towel.
Previous to use the paint spray , do not forget to shake . After verification, spray paint recommended by the paint manufacturer car distance. In the first layer, the paint will be a slight shadow . Repeating the same procedure as above spraying twice more for a total of three layers. If you feel that the paint is not dark enough , you can apply an additional coat of paint too. Once you have completed the process of painting , leaving the final coat of paint to dry for at least 3 hours .
Later than it has dried , applying a layer of varnish with a brush. Apply sandpaper to fine-grained sand on the surface and apply another coat of clear finish . Do again the process of sanding with very fine sandpaper to finish varnish surface of the vehicle and chamois. The painting process is completed, and they are free to withdraw all protection strips and sheets. Clean freshly painted with a microfiber cloth dipped in glaze, add a little extra sparkle to your car surface.
Keep in mind, paint your vehicle in a well ventilated area while wearing personal protective equipment required . Paints are toxic and can pose many health risks .