The exhaust system of automobiles consists of tubes of different ways to connect to each other. Each shape conforms to a portion of the bottom of the car. Each operational pipeline to move the exhaust gas back, but a large number of segments are specialized.
The exhaust system of your car is a way out through the muffler. Like the color of the exhaust is dark, quiet tends to fade and get dirty. Put water in it just do not rust and prolong life. However, outside of the muffler can be cleaned by effective means.
You can use paper towels or a dry cloth, wiping dust or soot from the outside of the muffler. Measure one tablespoon of dish soap and mix with a quart of warm water. Wash the outside of the muffler, use a cloth with this mixture. Soap is helpful to reduce fat and remove stains that can not be removed by just dragging the cloth.
This method is applicable when it is observed that the muffler is still listed as dull chrome reflections or no. Determining if a muffler is made of chromium or aluminum. According to the muffler, buy aluminum or polished chrome.
With a soft, dry cloth, apply the varnish. In addition to the silent looks new and glossy varnish also protects dirty easily .
If you have a rusty muffler, better to buy a new one. If you can not afford to buy a new one , you can drill holes through the muffler box. The pressure is reduced against each hole will also increase the noise of exhaust gases.
The majority people avoid paint your car for themselves because they are afraid not to do it properly. Previous to you begin, park your car in a well ventilated area to facilitate drying. Use duct tape and plastic sheeting to cover the parts of the car that will not be painted as windows , lights and mirrors. Rub the surface of your vehicle with medium grit sandpaper . Wipe up with a dry cloth to remove any foreign particles.
On the surface of your car, applying a layer of primer. Use brush to ensure that the primer is spread uniformly . Using sandpaper fine grain , rub the surface of the car. Then you can remove dirt and sand particles with a dry towel.
Previous to use the paint spray , do not forget to shake . After verification, spray paint recommended by the paint manufacturer car distance. In the first layer, the paint will be a slight shadow . Repeating the same procedure as above spraying twice more for a total of three layers. If you feel that the paint is not dark enough , you can apply an additional coat of paint too. Once you have completed the process of painting , leaving the final coat of paint to dry for at least 3 hours .
Later than it has dried , applying a layer of varnish with a brush. Apply sandpaper to fine-grained sand on the surface and apply another coat of clear finish . Do again the process of sanding with very fine sandpaper to finish varnish surface of the vehicle and chamois. The painting process is completed, and they are free to withdraw all protection strips and sheets. Clean freshly painted with a microfiber cloth dipped in glaze, add a little extra sparkle to your car surface.
Keep in mind, paint your vehicle in a well ventilated area while wearing personal protective equipment required . Paints are toxic and can pose many health risks .
Corrosion on a car is to be avoided. In the rainy season, the threat of corrosion on the car body bigger. These can have a porous corrosion on the car body. Corrosion caused by humid temperatures are confined within the cavity of the car body. Dirt, rain and foreign objects that contain salts accumulate in the body cavity of the car and cause corrosion. Another cause of corrosion is peeling paint and upholstery car body from impact by hard objects. Several attempts to prevent corrosion, among others,repair flaking paint and scratches on the car body as soon as possible if found on the body of your car. If the car you are exposed to rain, immediately cleaned with clean water, especially at the bottom of your car. This has the purpose of dirt on the bottom of the car can be lost.
There are other ways to protect your car from the threat of corrosion is to coat your car with a stainless body.Usually, anti-corrosion products using coating systems andelectronic systems.
If you already have a car that is still a little corrosion, you can do the repair yourself with a special paint. But if your car has corrosion in the square footage, you should bring your car to a body repair shop. By using special tools,corrosion on your car can be removed. Your car can be returned smoothly as before. Smoothness of your car can make you comfortable when riding. In addition,the sale value of your car will stay up.
Wash your own car is not difficult. You must prepare the tools and materials such as cotton cloth or a soft, clean gloves to wash the car. Special shampoo for cars as well prepared and of course clean water to wash your car.
The first step, your car must be put in the shade and the surface is sloping so that the washing water can quickly flow. Car wash is part of your car wheels. You can use a cleaning liquid to the rim. Section between the wheels must also be cleaned using a clean cloth. Rubbed with a soft alloy that does not have a scratch.
The next step, watered the whole surface of your car, starting from the top and the bottom. You can better use the water hoses that can be set the spray. Spray of water that is too tight can push dirt into the car body.
Wipe clean and dry cotton used in the drying process. The cloth is placed over the surface of car bodies and allowed to absorb water. Lap diusapkan not like ironing motion to prevent scratches on the paint.
Next, open the car doors, as well as hood and trunk to remove the water that drips into. You jugadapat using machine vacuum cleaner to help dry your car. You should wash your car at least once every two weeks. If the rainy season, car washing activities can be more frequent. Not only to wash clothes, your car must also be washed. Because the appearance of your car can increase your own image.